臺灣核心實作指引(TW Core IG)
0.3.2 - Trial Use

This page is part of the 臺灣核心實作指引(TW Core IG) (v0.3.2: Releases) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: TWCoreRelatedPerson - Detailed Descriptions

Active as of 2024-12-12

Definitions for the RelatedPerson-twcore resource profile.

Guidance on how to interpret the contents of this table can be found here

0. RelatedPerson
2. RelatedPerson.active
Control1..?
Must Supporttrue
4. RelatedPerson.patient
TypeReference(TW Core Patient)
Must Supporttrue
6. RelatedPerson.relationship
BindingThe codes SHOULD be taken from PatientRelationshipType
(preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype)

病人與相關人士之間關係的類型。

Must Supporttrue
8. RelatedPerson.name
Must Supporttrue
10. RelatedPerson.telecom
Must Supporttrue
12. RelatedPerson.address
Must Supporttrue

Guidance on how to interpret the contents of this table can be found here

0. RelatedPerson
Definition

Information about a person that is involved in the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process.

ShortA person that is related to a patient, but who is not a direct target of care
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. RelatedPerson.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. RelatedPerson.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. RelatedPerson.active
Definition

Whether this related person record is in active use.

ShortWhether this related person's record is in active use
Comments

This element is labeled as a modifier because it may be used to mark that the resource was created in error.

Control10..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to be able to mark a related person record as not to be used, such as if it was created in error.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. RelatedPerson.patient
Definition

The patient this person is related to.

ShortThe patient this person is related to
Control1..1
TypeReference(TW Core Patient, Patient)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

We need to know which patient this RelatedPerson is related to.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. RelatedPerson.relationship
Definition

The nature of the relationship between a patient and the related person.

ShortThe nature of the relationship
Control0..*
This element is affected by the following invariants: tw-core-4
BindingThe codes SHOULD be taken from PatientRelationshipTypehttp://hl7.org/fhir/ValueSet/relatedperson-relationshiptype
(preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype)

病人與相關人士之間關係的類型。


The nature of the relationship between a patient and the related person.

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. RelatedPerson.name
Definition

A name associated with the person.

ShortA name associated with the person
Control0..*
This element is affected by the following invariants: tw-core-4
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. RelatedPerson.telecom
Definition

A contact detail for the person, e.g. a telephone number or an email address.

ShortA contact detail for the person
Comments

Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

Control0..*
TypeContactPoint
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

People have (primary) ways to contact them in some way such as phone, email.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. RelatedPerson.address
Definition

Address where the related person can be contacted or visited.

ShortAddress where the related person can be contacted or visited
Control0..*
TypeAddress
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to keep track where the related person can be contacted per postal mail or visited.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. RelatedPerson
Definition

Information about a person that is involved in the care for a patient, but who is not the target of healthcare, nor has a formal responsibility in the care process.

ShortA person that is related to a patient, but who is not a direct target of care
Control0..*
Is Modifierfalse
Summaryfalse
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. RelatedPerson.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. RelatedPerson.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. RelatedPerson.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. RelatedPerson.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages)

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. RelatedPerson.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. RelatedPerson.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. RelatedPerson.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. RelatedPerson.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. RelatedPerson.identifier
Definition

Identifier for a person within a particular scope.

ShortA human identifier for this person
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Summarytrue
Requirements

People are known by a variety of ids. Some institutions maintain several, and most collect identifiers for exchange with other organizations concerning the patient. Examples are national person identifier and local identifier.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. RelatedPerson.active
Definition

Whether this related person record is in active use.

ShortWhether this related person's record is in active use
Comments

This element is labeled as a modifier because it may be used to mark that the resource was created in error.

Control1..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to be able to mark a related person record as not to be used, such as if it was created in error.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. RelatedPerson.patient
Definition

The patient this person is related to.

ShortThe patient this person is related to
Control1..1
TypeReference(TW Core Patient)
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

We need to know which patient this RelatedPerson is related to.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. RelatedPerson.relationship
Definition

The nature of the relationship between a patient and the related person.

ShortThe nature of the relationship
Control0..*
This element is affected by the following invariants: tw-core-4
BindingThe codes SHOULD be taken from PatientRelationshipType
(preferred to http://hl7.org/fhir/ValueSet/relatedperson-relationshiptype)

病人與相關人士之間關係的類型。

TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

We need to know the relationship with the patient since it influences the interpretation of the information attributed to this person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. RelatedPerson.name
Definition

A name associated with the person.

ShortA name associated with the person
Control0..*
This element is affected by the following invariants: tw-core-4
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Related persons need to be identified by name, but it is uncommon to need details about multiple other names for that person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. RelatedPerson.telecom
Definition

A contact detail for the person, e.g. a telephone number or an email address.

ShortA contact detail for the person
Comments

Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

Control0..*
TypeContactPoint
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

People have (primary) ways to contact them in some way such as phone, email.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
30. RelatedPerson.gender
Definition

Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes.

Shortmale | female | other | unknown
Control0..1
BindingThe codes SHALL be taken from AdministrativeGender
(required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

The gender of a person used for administrative purposes.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Needed for identification of the person, in combination with (at least) name and birth date.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. RelatedPerson.birthDate
Definition

The date on which the related person was born.

ShortThe date on which the related person was born
Control0..1
Typedate
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. RelatedPerson.address
Definition

Address where the related person can be contacted or visited.

ShortAddress where the related person can be contacted or visited
Control0..*
TypeAddress
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to keep track where the related person can be contacted per postal mail or visited.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. RelatedPerson.photo
Definition

Image of the person.

ShortImage of the person
Control0..*
TypeAttachment
Is Modifierfalse
Summaryfalse
Requirements

Many EHR systems have the capability to capture an image of persons. Fits with newer social media usage too.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. RelatedPerson.period
Definition

The period of time during which this relationship is or was active. If there are no dates defined, then the interval is unknown.

ShortPeriod of time that this relationship is considered valid
Control0..1
TypePeriod
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. RelatedPerson.communication
Definition

A language which may be used to communicate with about the patient's health.

ShortA language which may be used to communicate with about the patient's health
Comments

If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple RelatedPerson.Communication associations. If the RelatedPerson does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

If a related person does not speak the local language, interpreters may be required, so languages spoken and proficiency is an important things to keep track of both for patient and other persons of interest.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. RelatedPerson.communication.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
44. RelatedPerson.communication.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. RelatedPerson.communication.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. RelatedPerson.communication.language
Definition

The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

ShortThe language which can be used to communicate with the patient about his or her health
Comments

The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

Control1..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages)

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. RelatedPerson.communication.preferred
Definition

Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

ShortLanguage preference indicator
Comments

This language is specifically identified for communicating healthcare information.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))